teapot

Printability estimate

Size: 14.0 × 25.8 × 13.3 mm

Material: 0.53 cm³ of solid volume

Overhangs: 6.9% of the surface, steepest 79°

Walls: thinnest cross-section 0.10 mm, measured horizontally (3.3% under 0.80 mm)

Mesh: 1,456 triangles, watertight

6.9% of the surface overhangs past 45°; plan on supports, or print it in a different orientation. The thinnest solid cross-section measured is 0.10 mm across, under two passes of a 0.4 mm nozzle, so the thinnest parts may come out gappy or not at all.

An estimate produced by software, not a certification. It was measured once, from the geometry of this version in the orientation above, at the parameter values the author published. It knows nothing about your machine, your material or your settings, and can be wrong in both directions. Thin features are found by sampling, so a small one can be missed. Section 7 of the terms covers this.