Autore della comunità
@oriforma
Oriforma
Progetti parametrici creati per essere esplorati, adattati e costruiti.
Modelli 6

U-shaped retaining clip
@oriforma1 parametro
A connected U-shaped clip with inward retaining lips. Flexibility depends on material; no mechanical certification.

Utility hook
@oriforma1 parametro
A solid-backed utility hook. Attachment and safe load depend on material and mounting. No load rating.

Open rectangular enclosure
@oriforma1 parametro
A 50 by 35 mm open box with 2 mm walls and a floor at least 2 mm thick. No lid or sealing claim.

Footed storage divider
@oriforma1 parametro
A 100 mm wide partition with a transverse foot. Check fit against your storage container.

Four-hole mounting base
@oriforma1 parametro
A 40 by 30 mm mounting plate with four 3.2 mm clearance holes at 30 by 20 mm spacing.

Through-hole standoff
@oriforma1 parametro
An 8 mm outside diameter spacer with a 3.2 mm clearance bore. No thread is modelled.